FLP-TT
Loop Power Indicator
Loop Power Indicator
Loop Power Indicator With Local Display
| Parameter | Specification |
|---|---|
| Programmable for all input type & range | Universal input (RTD, thermocouple, ohm, V, mV) |
| 4 digit 0.56" led | 1.5 kV RMS isolation between input & output |
| High accuracy | Linearized output |
| Fast response time | <500 ms |
| Input and output scaling | Reverse polarity protection |
| Direct/reverse output | Sensor break detection |
| Digital filter Modbus tester software for configuration, calibration & monitoring | |
| Input | Pt100 3-wire, Pt100 4-wire |
| Sensor current | 0.2mA |
| Potentiometer/ resistance | 0-2500ω, 5000ω |
| Thermocouple (with internal and | External ambient sensor |
| (Rtd-3wire sensor)) | E, J, K, T, B, R, S, N |
| V | 0-5Vdc / 0-10Vdc |
| mV | 0-75mV/ 0-500 mV dc |
| Input impedance | > 1m ohms |
| Sensor break current | <1 Ua |
| Zero | through Modbus tester |
| Span | through Modbus tester |
| E, J, K, T, N, PT-100, MV, Ω | 0.1% OF FS |
| B, R, S | 0.25% oF FS |
| E, J, K, T, N | ±2 ºC |
| R, S | ±3 ºC |
| Response time | < 0.5 sec |
| Stability | ±0.1% per year |
| Digital filter | 0-20 sec settable through software (2 sec default) |
| Cmrr | > 130 db |
| Nmrr | 40 db |
| Temp-co | <150 ppm |
| Output | 4- 20mA |
Description
- Aavad make a 2-wire loop powered & fully programmable universal flameproof temperature transmitter with display, designed for isolated and accurate temperature measurements and signal conditioning applications.
